Ladders and Stepstools
Electron Microscopy Sciences MicroPoint™ Featherlite MPF-1, All Smooth, 140 mm
MicroPoint scissors can be used for suture or tissue and they are manufactured without rings which eliminates the problems with right handed or left handed users. Scissors cut by shearing and have three times the shearing angle to reduce "tissue crushing. They last far longer than ordinary scissors.
O.R. Castro-Viejo quality at a floor-grade price.
They offer consistent cutting at the tip.
The blades cannot work loose and the contact between the blades remains constant.
Adjustable shearing contact.
All MicroPoint™ Scissors are guaranteed for life against rust, breakage and rivet loosening.
Surface: Smooth
OAL: Sharp/Sharp Straight
Blade: 20 mm
Blade Size: 140 mm
Electron Microscopy Sciences MicroPoint™ Featherlite MPF-1C, All Smooth, 140 mm
MicroPoint scissors can be used for suture or tissue and they are manufactured without rings which eliminates the problems with right handed or left handed users. Scissors cut by shearing and have three times the shearing angle to reduce "tissue crushing. They last far longer than ordinary scissors.
O.R. Castro-Viejo quality at a floor-grade price.
They offer consistent cutting at the tip.
The blades cannot work loose and the contact between the blades remains constant.
Adjustable shearing contact.
All MicroPoint™ Scissors are guaranteed for life against rust, breakage and rivet loosening.
Surface: Smooth
OAL: Sharp/Sharp Curved
Blade: 20 mm
Blade Size: 140 mm
Electron Microscopy Sciences MicroPoint™ Featherlite MPF-3, Smooth/serrated, 125 mm
MicroPoint scissors can be used for suture or tissue and they are manufactured without rings which eliminates the problems with right handed or left handed users. Scissors cut by shearing and have three times the shearing angle to reduce "tissue crushing. They last far longer than ordinary scissors.
O.R. Castro-Viejo quality at a floor-grade price.
They offer consistent cutting at the tip.
The blades cannot work loose and the contact between the blades remains constant.
Adjustable shearing contact.
All MicroPoint™ Scissors are guaranteed for life against rust, breakage and rivet loosening.
Surface: Smooth/serrated
OAL: Sharp/Blunt Straight
Blade: 20 mm
Blade Size: 125 mm
Grainger Multipurpose Ladder 8 ft IAA Fiberglass
The Grainger Approved Multipurpose Ladder is an aluminum ladder with 225 lb load capacity. It can be used as an extension ladder, staircase ladder, 90 degree ladder, and as two trestle ladders. The ladder has slip-resistant rubber feet and can extend to 16 ft with a closed height of 8 ft 10 in. The multipurpose design allows this ladder to be highly versatile for various jobs and spaces, while still being lightweight at only 26.9 lb. With ANSI Type IA duty rating, this ladder is suitable for extra heavy duty industrial use.
Grainger Fiberglass Stair Tread 144 x 12 In
The Tripp Lite SmartRack 16U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is a 16U wall-mount rack that is 28" deep to accommodate network switches and patch panels. It is constructed with steel for durability and vented sides for airflow. The front door features a reversible hinge for left or right swing. The rack includes mounting hardware and has a weight capacity of 200 lbs. The slim 16U design saves space while providing equipment mounting. This wall-mount rack cabinet ships fully assembled for quick installation.
Grainger Fiberglass Stair Tread 48 x 12 In
The Fibergrate Fiberglass Bar Stair Tread is a heavy duty stair tread made of molded fiberglass reinforced plastic with a meniscus bar surface. It has a slip resistant surface and is designed for industrial and commercial use on stairs and landings. This stair tread measures 36 inches long x 11-1/2 inches wide x 1-3/8 inches thick and weighs approximately 8 lbs. It can support a uniform load of 100 psf. The bar spacing is 1-3/16 inches on center. This stair tread meets OSHA standards for slip resistance on stairs. It comes in safety yellow color.
Grainger Fiberglass Stair Tread 36 x 12 In
The Fibergrate Fiberglass Bar Stair Tread is a durable and slip-resistant stair tread made of molded fiberglass reinforced plastic with a meniscus bar surface. It measures 36 inches long x 11-1/2 inches wide x 1 inch thick. The tread features angled leading edges for easy access and has a lightweight, high strength construction. It can support heavy foot traffic for industrial and commercial applications. The bar surface provides traction and drainage. The stair tread meets OSHA standards for slip resistance on stairs.
Grainger Phenolic Tread Wheel 12 3500 lb.
The Phenolic Tread Wheel is a 12 inch diameter wheel with a phenolic tread surface. It has a load capacity of 250 lbs per wheel and is designed for light duty applications like carts, workbenches, and conveyors. The wheel features a precision ball bearing and a 3/4 inch wide tread width. It has a black phenolic tread that resists chemicals, cuts, and abrasions. The wheel has a straight bore and requires a 3/4 inch diameter shaft. It is sold individually. This heavy duty phenolic wheel provides durability and chemical resistance.
Grainger Fiberglass Stair Tread 36 x 12 In
The Fibergrate Fiberglass Bar Stair Tread is a high strength, corrosion resistant fiberglass reinforced plastic (FRP) stair tread designed for industrial and commercial use. It measures 36 inches long x 12 inches wide x 1 inch thick. The tread features an open grating pattern with 1-1/2 inch square openings and abrasive grit strips for slip resistance. It has a load capacity of 100 psf. The bar design provides strength while allowing water drainage and air circulation. This stair tread can be used for new construction or retrofitting existing stairs. Made in the USA out of fiberglass reinforced plastic, this tread offers durability with low maintenance.
Grainger Fiberglass Stair Tread 144 x 12 In
The Fibergrate Fiberglass Bar Stair Tread is a heavy duty, corrosion resistant stair tread made of molded fiberglass reinforced plastic with a meniscus bar surface. It has a width of 24 inches, length of 36 inches, thickness of 1.5 inches, and weight of 11 lbs. The tread features a slip resistant surface and is designed for industrial and commercial use on metal pan stairs. It meets OSHA and ADA requirements. The bar surface provides maximum slip resistance.
Grainger PUR Tread on Plastic Core Wheel
The Polyurethane Tread on Plastic Stair Tread by Safe-T-Step is a durable, slip-resistant stair tread designed for use on plastic stairs. It measures 36 inches long by 4 inches wide and has a medium coarse texture. The tread is made from polyurethane and has angled nosing. It can be installed using construction adhesive. This stair tread provides an anti-slip surface to help prevent falls on plastic stairs. The angled nosing provides visibility and meets code requirements. Polyurethane construction ensures durability in high traffic areas. Overall this is a good option to improve traction and safety on existing plastic stairs.